Epoxy floor and wear-resistant floor are more used in the floor of electronic and electrical workshops. Many workshops choose different workshop floors according to their production conditions. Today's enterprises use more epoxy floor and wear-resistant floor, but it is not suitable for long-term use. At this time, the old ground renovation is needed. Established in 2004, Shanghai Qianyi Communication Equipment Co., Ltd. specializes in R&D and manufacturing of optical fiber and optical cable specialized equipment. The company's main technical personnel are engaged in research and development of optical fiber and optical cable equipment. What is the choice of Shanghai Qianyi Communication Equipment Co., Ltd. for the renovation of the old ground?
The wear-resistant floor is actually a kind of high-strength concrete. Its resistance to penetration is poor. For some workshops where oil is often present, such as machining workshops, oil can easily penetrate into the floor, causing it to be completely clean and cannot be It is resistant to corrosion by chemicals and is easily corroded by acids and alkalis. Some colored (such as green) wear-resistant floor, there will be slight fading after light exposure. There are several workshops in Shanghai Qianyi Communication Equipment. There are problems such as dust and sand on the ground, and it is urgent to renovate the old ground. The first floor of the refurbished workshop is wear-resistant ground. The green color on the wear-resistant floor has all faded. In many places, dust and sand have appeared, which has an impact on the daily production and corporate image of the company.
The old ground renovation project of the electronic and electrical workshop of Shanghai Qianyi Communication Equipment Co., Ltd. came from the customer referral. After more than one month of communication and communication, KAIDA finally got the construction opportunity for the renovation of the old floor of the wear-resistant floor! In July 2017, KAIDA officially entered the construction. When the materials and equipment entered the site one after another, the old floor renovation of the wear-resistant floor began. The first part of the wear-resistant floor was dusted off by the machine. In order to protect the concrete foundation, the green part of the workshop floor was not worn away, and the light green color was retained.
Before grinding the floor of the workshop, the worker of the KAIDA floor first cleaned the floor and then grinded the ground with a grinder. Since the workshop is a relatively closed space, the temperature in Shanghai has reached 40 degrees at this time, and the red high temperature alarm has already sounded, but our workers are still eager to work hard, in order to give customers a satisfactory answer. Since the workshop area is 2,000 square meters, plus the number of grinding times, it took several days to complete the ground grinding step.
After the ground grinding is completed, the next moment is the KAIDA tempered floor system debut! The KAIDA tempered floor system combines a complete set of construction techniques and selects KAIDA's concrete dense tempering agent to effectively seal the pores on the surface of the floor through chemical reaction with concrete, firmly bonding with concrete and infiltrating concrete. The internal 5-8MM allows the ground to be effectively sealed and tempered. After the KAIDA tempered floor construction is completed, it needs to be cleaned with water. Due to the problem of the quality of the ground in the workshop, it is necessary to apply two tempering agents to ensure a sufficient and uniform chemical reaction with the concrete. After all the air drying, the water is continuously sprinkled, which can make the floor of the workshop brighter and finally polish with a polishing machine. . What will be the polished workshop floor?
Wow! This is the effect of the renovation of the old ground! The gloss is really unmatched by other floors, and the pores on the ground are completely blocked. Since then, the floor of the workshop has good dust resistance, water repellency, oil resistance and impermeability. Stains can no longer damage the floor of the workshop. At the same time, the wear resistance and Mohs hardness of the floor of the workshop have also increased, becoming stronger than before, and heavy load and withstand voltage are not a problem. After 2 months, KAIDA floor system completed the construction process of the old floor renovation of the wear-resistant floor, and gave the owner a satisfactory work!